Honda Prelude

Here we can see that the car has been masked and all the repair areas primed ready for colour coating. The rear wing on the drivers side had been repaired and sprayed before and the lacquer was either poor quality, or, poorly applied as it was flaking away too easily under the sanding discs. The front bumper was the same only the lacquer was peeling very badly. All repairs on the car have been sprayed with three coats of etch primer, wet flatted and then two coats of filler primer over the top.

 DAY  1  2  3  4  >>

PHOTO 1

PHOTO 2

PHOTO 3

ENQUIRY | CONTACT | HISTORY | GALLERY | ADD LINK | MAP